Your parents are on the site to set up a rectangular ground floor of poultry house measuring 12m by 5m ,as a senior two mathematics leaner advise your parents on how to accumulately set up the ground?

To set up the rectangular ground floor of the poultry house measuring 12m by 5m, here is a step-by-step guide:

1. Start by marking out the area where the poultry house will be located. Use measuring tape and stakes to mark the corners of the 12m by 5m rectangle.

2. Clear the area of any debris or obstacles that may be in the way of construction.

3. Level the ground to ensure that the foundation of the poultry house will be stable and even. Use a shovel and a level to make sure the ground is flat.

4. Begin by laying the foundation of the poultry house. This can be done using concrete blocks or poured concrete. Make sure the foundation is level and secure.

5. Once the foundation is in place, start building the walls of the poultry house. Use materials such as wood or metal to construct the walls. Make sure the walls are sturdy and secure.

6. Install the roof of the poultry house. This can be done using metal sheets or other roofing materials. Make sure the roof is waterproof and will protect the poultry from the elements.

7. Finally, install any doors, windows, or other fixtures that are needed for the poultry house to be functional.

By following these steps, your parents will be able to successfully set up the rectangular ground floor of the poultry house measuring 12m by 5m.

Materials:

- Measuring tape
- Stakes or markers
- String or twine
- Chalk or spray paint

Steps:

1. Determine the Perimeter and Diagonal:

- The perimeter is the total length of the boundaries: Perimeter = 2(Length + Width) = 2(12m + 5m) = 34m
- The diagonal is the line connecting the two opposite corners: Diagonal = √(Length² + Width²) = √(12² + 5²) = 13m

2. Mark the Corners:

- Use stakes or markers to mark the four corners of the ground floor.

3. Lay Out the Perimeter String:

- Tie the string to one corner stake.
- Stretch the string tightly to the opposite corner stake, making sure it is 34m long.
- Secure the string to the opposite stake.

4. Measure and Mark the Diagonals:

- Use the measuring tape to measure the diagonal length of 13m.
- From each corner stake, lay a string diagonally to the opposite corner.
- Mark the point where the two diagonals intersect.

5. Set Up the Ground Corners:

- The intersection point of the diagonals marks the center of the rectangle.
- Use the stakes or markers to mark the ground corners 5m away from the center point along each diagonal.

6. Verify the Measurements:

- Re-measure the perimeter and diagonals to ensure accuracy.
- The perimeter should be 34m and the diagonals should both be 13m.

7. Mark the Boundaries:

- Use chalk or spray paint to mark the boundaries of the ground floor along the perimeter and diagonals.

Additional Tips:

- Use a level to ensure the ground is level before setting up the ground.
- If the ground is not level, adjust the heights of the corner stakes accordingly.
- Consider adding a slope to the ground for proper drainage.
- Use durable materials for the string and stakes to ensure they withstand outdoor conditions.