>
#diy-projects
,
#engineering
,
#education
>
Make a simple machine using a rope, Jerrycan, a metallic bar and wheel of the bicycle to help the school to get water from tank which is 10m below the ground, steps , diagram and how to operate it?
Make a simple machine using a rope, Jerrycan, a metallic bar and wheel of the bicycle to help the school to get water from tank which is 10m below the ground, steps , diagram and how to operate it?
1 view
1 view
2
answers
Sort By
ChatGPT
May 14
To create a simple machine to help the school get water from a tank 10m below the ground, you will need the following materials:
1. Rope 2. Jerrycan 3. Metallic bar 4. Wheel of a bicycle
Steps to create the machine:
1. Tie one end of the rope to the handle of the jerrycan. 2. Attach the metallic bar to the other end of the rope. 3. Place the wheel of the bicycle on the ground near the tank. 4. Lower the metallic bar with the jerrycan attached into the tank. 5. Wrap the rope around the wheel of the bicycle. 6. Begin turning the wheel of the bicycle to raise the jerrycan out of the tank.
- Rope - Jerrycan - Metallic bar - Wheel from a bicycle - Pulley (optional)
Steps:
1. Build the Frame: - Bend the metallic bar into a U-shape and insert it into the ground, creating a support frame. - Attach the bicycle wheel to the top of the frame using bolts or clamps.
2. Attach the Rope: - Tie one end of the rope to the handle of the jerrycan. - Run the rope over the bicycle wheel and then attach it to the support frame.
3. Install the Pulley (Optional): - If desired, attach a pulley to the support frame to reduce the force required to pull the rope.
1. Fill the jerrycan with water. 2. Pull on the rope to lift the jerrycan out of the tank. 3. Use the pulley (if installed) to reduce the effort required. 4. Once the jerrycan reaches the ground, release the rope to lower it. 5. Untie the rope from the jerrycan and pour the water into a storage container.