Bettu
Sep 9
Explain to sewing attaching belt, inseams, top stitch, side seam, opening belt and corner close in garment production?
1 view
1 view
2 answers
Sort By
ChatGPT
Sep 9
In garment production, attaching a belt involves sewing the belt onto the garment at the waistline. This can be done by sewing the belt directly onto the garment or by creating belt loops to thread the belt through.
Inseams are the seams that run along the inner leg of a garment, connecting the front and back panels. These seams are typically sewn with a straight stitch and then finished with an overlock or serger stitch to prevent fraying.
Top stitching is a decorative stitch that is sewn on the outside of a garment, usually along seams or edges. This stitch not only adds a decorative touch but also helps to reinforce the seam and prevent it from stretching or coming apart.
Side seams are the seams that run along the sides of a garment, connecting the front and back panels. These seams are typically sewn with a straight stitch and then finished with an overlock or serger stitch to prevent fraying.
Opening belt refers to creating an opening in the garment to accommodate a belt. This can be done by sewing a button or hook and eye closure at the waistline, or by adding belt loops to thread the belt through.
Corner close refers to sewing the corners of a garment together to create a finished edge. This can be done by sewing a straight stitch along the edge and then trimming the excess fabric, or by folding the fabric over and sewing a top stitch to secure the edge.
Inseams are the seams that run along the inner leg of a garment, connecting the front and back panels. These seams are typically sewn with a straight stitch and then finished with an overlock or serger stitch to prevent fraying.
Top stitching is a decorative stitch that is sewn on the outside of a garment, usually along seams or edges. This stitch not only adds a decorative touch but also helps to reinforce the seam and prevent it from stretching or coming apart.
Side seams are the seams that run along the sides of a garment, connecting the front and back panels. These seams are typically sewn with a straight stitch and then finished with an overlock or serger stitch to prevent fraying.
Opening belt refers to creating an opening in the garment to accommodate a belt. This can be done by sewing a button or hook and eye closure at the waistline, or by adding belt loops to thread the belt through.
Corner close refers to sewing the corners of a garment together to create a finished edge. This can be done by sewing a straight stitch along the edge and then trimming the excess fabric, or by folding the fabric over and sewing a top stitch to secure the edge.
0
Google Gemini AI
Sep 9
Attaching Belt
- Cut belt to desired length and width.
- Fold belt in half lengthwise and press.
- Pin belt to waistline of garment, aligning raw edges.
- Stitch belt to garment using topstitch or straight stitch.
Inseams
- Pin two leg pieces together along the inseam, right sides facing.
- Stitch inseam using a straight stitch, starting from the crotch and ending at the hem.
- Press open the inseam allowance.
Top Stitch
- Fold a small amount of fabric over the seam and stitch down using a topstitch stitch.
- Topstitching can be used for decorative or functional purposes, such as to secure seams or enhance durability.
Side Seam
- Pin two side pieces together along the side seam, right sides facing.
- Stitch side seam using a straight stitch, starting from the hem and ending at the armhole.
- Press open the side seam allowance.
Opening Belt
- Fold belt in half and stitch ends together using a straight stitch.
- Create a small opening in the seam to insert the belt loop.
Corner Close
- For sharp corners, such as at the bottom of a pocket, fold the fabric over twice to create a sharp point.
- Stitch the corner close using a small, sharp stitch.
- Cut belt to desired length and width.
- Fold belt in half lengthwise and press.
- Pin belt to waistline of garment, aligning raw edges.
- Stitch belt to garment using topstitch or straight stitch.
Inseams
- Pin two leg pieces together along the inseam, right sides facing.
- Stitch inseam using a straight stitch, starting from the crotch and ending at the hem.
- Press open the inseam allowance.
Top Stitch
- Fold a small amount of fabric over the seam and stitch down using a topstitch stitch.
- Topstitching can be used for decorative or functional purposes, such as to secure seams or enhance durability.
Side Seam
- Pin two side pieces together along the side seam, right sides facing.
- Stitch side seam using a straight stitch, starting from the hem and ending at the armhole.
- Press open the side seam allowance.
Opening Belt
- Fold belt in half and stitch ends together using a straight stitch.
- Create a small opening in the seam to insert the belt loop.
Corner Close
- For sharp corners, such as at the bottom of a pocket, fold the fabric over twice to create a sharp point.
- Stitch the corner close using a small, sharp stitch.
0
