Explain how to put labels by using machine in finishing stage to the garment productions?

1. Prepare the labels: Before starting the labeling process, make sure you have all the labels ready. These labels should have the necessary information such as brand name, size, care instructions, and any other relevant details.

2. Set up the labeling machine: Place the labeling machine in a convenient location near the finishing stage of the garment production line. Make sure the machine is properly calibrated and ready to use.

3. Load the labels: Insert the labels into the labeling machine according to the manufacturer's instructions. Make sure the labels are loaded correctly to ensure accurate placement on the garments.

4. Position the garments: Place the garments on the conveyor belt or other designated area for labeling. Make sure the garments are positioned correctly and ready to receive the labels.

5. Start the labeling process: Turn on the labeling machine and begin the labeling process. The machine will automatically apply the labels to the garments as they pass through the machine.

6. Inspect the labeled garments: Once the labeling process is complete, inspect the labeled garments to ensure that the labels are applied correctly and securely. Make any necessary adjustments or corrections as needed.

7. Finish the garments: After the labels have been applied and inspected, the garments can be finished and prepared for packaging and distribution.

8. Quality control: Throughout the labeling process, it is important to conduct regular quality control checks to ensure that the labels are being applied accurately and consistently. Make any necessary adjustments to the machine or process to maintain high-quality standards.

Steps to Put Labels on Garments Using Machine in Finishing Stage:

Materials:

- Garment labeling machine
- Garment labels
- Adhesive strips or heat transfer labels
- Iron (if using heat transfer labels)

Instructions:

1. Prepare the Machine:

- Set up the garment labeling machine according to the manufacturer's instructions.
- Ensure the machine is calibrated correctly for the label size and type.

2. Prepare the Labels:

- If using adhesive strips, peel off the backing from the adhesive strip and attach it to the label.
- If using heat transfer labels, follow the manufacturer's instructions for preparing the label.

3. Position the Garment and Label:

- Place the garment on the machine's conveyor belt or table.
- Align the label position on the garment according to the desired location.

4. Apply the Label:

- Adhesive Strips: Insert the adhesive strip into the machine's slot and press the button to apply it to the garment.
- Heat Transfer Labels: Place the iron on the label as instructed by the manufacturer to heat transfer the design onto the garment.

5. Trim Excess Material:

- If any excess material is exposed around the label, use scissors or a trimmer to remove it neatly.

6. Check Quality:

- Examine the label placement and quality to ensure it is properly attached and legible.

7. Repeat for Multiple Garments:

- Repeat the process for as many garments as required.

Tips:

- Test the machine on a scrap fabric before applying labels to actual garments.
- Use high-quality labels and adhesive strips for durability and adhesion.
- Ensure the garment is clean and dry before applying labels.
- Follow the manufacturer's instructions carefully for optimal results.
- Regularly maintain and calibrate the labeling machine to ensure accuracy and efficiency.