Describe the steps to create and edit a curtain wall system.

1. Start by creating a new curtain wall system in your design software. This can typically be done by selecting the curtain wall tool from the menu and drawing a rectangle on the floor plan where you want the curtain wall to be located.

2. Once the curtain wall is created, you can begin editing it by selecting the curtain wall and accessing the properties or settings menu. Here, you can adjust parameters such as the height, width, thickness, material, and glazing type of the curtain wall.

3. You can also add mullions, transoms, and panels to the curtain wall system to customize its appearance and functionality. Mullions are vertical members that divide the curtain wall into sections, while transoms are horizontal members that provide structural support.

4. To edit the mullions and transoms, select them individually and adjust their properties such as size, spacing, and material. You can also add corner mullions to create a seamless transition between adjacent curtain wall sections.

5. Panels can be added to the curtain wall system to fill in the spaces between the mullions and transoms. These panels can be customized in terms of material, size, and transparency to achieve the desired aesthetic and performance requirements.

6. Finally, you can further refine the curtain wall system by adjusting its connections to the building structure, adding doors or windows within the curtain wall, and applying finishes or coatings to enhance its appearance and durability.

7. Once you are satisfied with the design of the curtain wall system, you can save the changes and generate detailed drawings or documentation for construction purposes. Make sure to review the design with other team members or stakeholders to ensure that it meets all project requirements and specifications.

Creating a Curtain Wall System

1. Define the Curtain Wall Location: Use the Wall tool to create a wall that will act as the host wall for the curtain wall system.

2. Activate the Curtain Wall Tool: Select the Curtain Wall tool from the Architecture tab.

3. Specify the Curtain Wall Placement: Click on the host wall to attach the curtain wall system. You can specify the alignment and offset if needed.

4. Set the Vertical Divisions: Divide the curtain wall vertically using mullions. Use the Add Mullion tool to insert vertical members at specified intervals or locations.

5. Define the Horizontal Divisions: Subdivide the curtain wall horizontally using transoms. Use the Add Transom tool to insert horizontal members.

6. Add Panels: Insert curtain wall panels within the defined divisions. Select the Panel tool and click within the appropriate division to place a panel.

7. Configure the Panel Properties: Right-click on a panel and select Properties to modify its material, thickness, and other attributes.

8. Define the Curtain Wall Caps: Add caps to the top and bottom of the curtain wall system. Use the Curtain Wall Cap tool to create and customize the caps.

Editing a Curtain Wall System

1. Select the Curtain Wall System: Click on the curtain wall system you want to edit.

2. Edit Vertical Divisions:
- To add a mullion, click the Insert Mullion tool and specify its location.
- To remove a mullion, select it and press Delete.

3. Edit Horizontal Divisions:
- To add a transom, click the Insert Transom tool and specify its location.
- To remove a transom, select it and press Delete.

4. Modify Panels:
- To change a panel's properties, right-click on it and select Properties.
- To add or remove panels, use the Add Panel or Remove Panel tools.

5. Adjust Curtain Wall Caps:
- To modify the cap properties, right-click on the cap and select Properties.
- To add or remove caps, use the Curtain Wall Cap tool.

6. Move or Resize the Curtain Wall: Select the curtain wall system and drag it to a new location or use the Size grips to resize it.

7. Apply Changes: Click the Apply button on the ribbon to save your edits.